TEC B-480 SERIES Maintenance Manual page 86

5. DIAG. TEST OPERATION
5.3.21 Stacker Selection
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a
fast forward.
2. A changed Stacker selection is stored in memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 > D I A G .
Press the [FEED] key.
< 2 > P A R A M E T E R
Press the [PAUSE] key 23 times.
S T A C K E R T T T T
Press the [FEED] key or
[RESTART] key to select
ON or OFF to the stacker.
Press the [FEED]
and [RESTART] key
at the same time.
V 1 . 0 A
S E T
ON:
OFF: Stacker is not used.
F
O F
Press the [PAUSE] key.
Continued on Section 5.3.22
FEED Key Function Selection.
5-43
5.3 PARAMETER SETTING MODE
Stacker is used.
EO18-33004