Oki B4350 Service Manual page 54

The following are the meaning of the symbols in the LCD display.
"TRAY2" is indicated only when the second tray is set, and "MPF" is displayed only when the
multipurpose feeder is set.
xxxx: Emulation (AUTO, PCL, PSE, PPR, FX)
tttt: Trays (TRAY1, TRAY2, MPF, MANUAL)
mmmm: Paper Size (LETTER, A4 SIZE, ..., B5 SIZE, A6 SIZE)
pppp: Media type (Plain, Transparency, ...)
cccc: COVER (UPPER, TRAY2)
The following are indicated in the contents section of the displayed table.
(Job Account-related): Displayed only when the Job Account function is valid.
(PSE-related):
(TRAY2-related):
(RS232C-related):
(NIC items):
LCD
Status level
Normal ON-LINE
xxxx
Normal OFF-LINE
xxxx
Normal FILE
ACCESS
Normal ARRIVE
xxxx
Normal ACTIVE
xxxx
Normal DATA
xxxx
Normal PRINTING
Normal
kkk/lll
Normal FLUSHING
Normal FLUSHING
(JAM)
Normal FLUSHING
(DENIED)
Warn- FLUSHING
ing (LOG)
Normal
WARM UP
Normal
PWR SAVE
Warn-
ing TONERLOW
42641101TH Rev.1
Displayed only when PSE is set.
(PSE stands for Postscript3 Emulation. Only when PSE is set.)
Displayed only when TRAY2 is set.
Displayed only when an RS232C card is set.
Displayed only when an NIC card is set.
Table 5-1 (1/5)
LED
Light Shows on-line status.
No Light Shows off-line status.
Varies Accessing to an accounting file. (Job Account-related)
Varies Data receiving, process not started yet. Displayed mainly during
PJL process without text print data or during job spooling.
Blink Data receiving output processing
Varies Un-printed data remains in Buffer. Waiting for data to follow.
Varies Printer is printing.
Varies Printing a copy. kkk indicates the number of sheet being printed. lll
indicates the total number of sheets that have been printed.
The display for normal printing is applied when the number of
copies is one sheet. This item is displayed combined with a
different message in the first line.
Blink Job cancellation has been instructed. Data is being ignored till the
end of the job.
Blink Indicates a status of discarding data until the end of a job after a
job is cancelled when a jam is generated upon turning jam recov-
ery OFF. MSG blinks only on the top LCD line.
Blink Cancelled as permission for printing has not been received. (Job
Account-related)
1. MSG blinks only on the top LCD line when a job is received from
a user who has not received permission for printing.
Blink Indicates that a job has been cancelled as the area storing logs
inside the printer has been drained and furthermore, a "cancel job"
instruction appears when logs are full.
(Job Account-related) MSG blinks only on the top LCD line.
Varies Indicates that the printer is now warming up. This item is displayed
combined with a different message in the first line.
Varies A printer is in power save mode. Displayed combined with other
messages in the first line.
Varies Toner amount is low. Displayed combined with other messages in
or Blink
the first line. Normal operation is possible. Not displayed, when a
drum counter is in 200 or less state or a "CHG DRUM" state.
• In the case of "LOW TNR" of a menu is "STOP", TONER LOW
is usually detected from a state, LED is blinked, and it once
becomes OFF-LINE. It will be in an ON-LINE state by cover
opening and closing under push ON-LINE SW. If blink will be in
an ON-LINE state, it will usually return to a state.
Oki Data CONFIDENTIAL
Descroption
54 /