Oki B4350 Manual
8/16 mb flash dimm kit flash dimm option kits
Hide thumbs
Also See for B4350:
- Service manual (150 pages) ,
- Software installation manual (8 pages) ,
- Guía del usuario (96 pages)
Related Manuals for Oki B4350
Summary of Contents for Oki B4350
- Page 1 Flash DIMM Option Kits OKI 8 MB FLASH DIMM KIT #70042501 OKI 16 MB FLASH DIMM KIT #70042601...
- Page 2 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it.
-
Page 3: Table Of Contents
Contents Introduction ......... . 1 General Information. -
Page 5: Introduction
Introduction Important! The Flash DIMM option kits allow downloading PCL fonts and forms to the printer. How these fonts and forms are used in printed documents depends on the particular operating system and software application in use. This requires programming experience and an understanding of embedding control codes, which is beyond the scope of this software and documentation. -
Page 6: General Information
General Information The Flash DIMM card can be used to store fonts and overlays (PCL Macros), both of which are downloaded to the DIMM using the Storage Device Manager (SDM) software supplied on the CD with the kit. Fonts Fonts in either of the following formats can be stored: •... -
Page 7: Installing The Flash Dimm Card
Installing the Flash DIMM Card Caution! To avoid damage by static electricity or rough handling, keep the Flash DIMM in its packaging until you’re ready to install it. Note : The printer has only one slot in which to install an optional Flash DIMM card or the optional Postscript emulation card. - Page 8 b. Remove the access panel. 3. Locate the slot: Installing the Flash DIMM Card...
- Page 9 Caution! To avoid damage to the Flash DIMM from static electricity, ground yourself (touch metal) before handling it. 4. Remove the Flash DIMM from its packaging. 5. Hold the Flash DIMM with the gold contact edge down and the notched corner ( 1 ) to the right.
- Page 10 6. Place the DIMM in the slot and press down firmly until it snaps into place. Installing the Flash DIMM Card...
- Page 11 7. Replace the access panel: a. Align the tabs at the bottom of the access panel with the slots in the printer. b. Swing the panel up and tighten the screw to secure it in place. 8. Reattach the interface cord and power cable, then turn on the printer. Installing the Flash DIMM Card...
-
Page 12: Verifying Correct Installation
Verifying Correct Installation 1. Print a MenuMap: a. Press ON LINE to place the printer off line. b. Press MENU one or more times until INFORMATION MENU appears. c. Press ITEM + one or more times until PRINT MENU MAP appears. d. -
Page 13: Installing The Software
2. Follow the on-screen instructions to complete the installation. 3. Exit the Menu Installer. To Open Storage Device Manager Click Start → Programs → Okidata → Oki Storage Device Manager → Oki Storage Device Manager. For Information on Using Storage Device Manager See the Reference PDF file in the root directory of the CD. -
Page 14: Pcl Macro Control Codes
PCL Macro Control Codes The following table summarizes the control codes for PCL macros. For a complete list of control codes supported by the printer, see the Reference PDF file in the root directory of the CD supplied with the Flash DIMM. Command Explanation ESC&f#Y... - Page 16 Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Phone: (800) 654-3282 FAX: (856) 222-5320 www.okidata.com 58366601...