Removing The Light Bulb; Attaching The Light Bulb - Kenmore 385.19365 Owner's Manual

Removing the Light Bulb
Make sure the power supply is turned off.
To change the lamp, wait until the lamp has cooled
down°
[_ Open face plate cover.
[] Remove the black rubber lamp socket from the lamp
holder and pull out the light bulb.
@ Face cover plate
(_) Lamp socket
(_) Holder
@ Lamp
0 Pins
Attaching the Light Bulb
[_] To insert the lamp in the lamp socket, match the pins on
the lamp with the lamp socket holes.
Attach the lamp socket on the holder and close face
plate cover,.
120