Care Of Your Machine; Replacing The Light Bulb; Cleaning The Feed Dogs - Kenmore Sears 385.12314 Owner's Manual

SECTION VIII. CARE OF YOUR MACHINE
NOTE: Unplug the machine.
Do not dismantle the machine other than as
explained in this section
Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth
and mild soap,
Replacing the Light Bulb
CAUTION: As the light bulb could be HOT, protect your
fingers when you handle it_
Unplug the machine and open the face cover. While pushing
the bulb up, turn it counterclockwise to remove, Put in a
new bulb by pushing it up and turning it c!ockwise_.
Cleaning the Feed Dogs
Unplug the machine and remove the presser foot and
needle with a screwdriver..
Remove the needle plate with a screwdriver.
f
I
'l
!
I
I
Use a lint brush to clean the feed dogs
Replace needle plate and tighten with a screwdriver..
62