Corded Buttonhole; To Sew - Kenmore 385.19005 Owner's Manual

Corded Buttonhole
_i_) Stitch pattern:
(_) Needle thread tension
(_i.i P resser foot R:
_i) Pressure dial
I2
t to 5
Automatic buttonhole foot
3
Use the same procedure as the square buttonhole
procedure.
* Set the stitch width to match the thickness of the cord
used,.
• To sew
[9 With the buttonhole foot raised, hook the filler cord on
the spur at the back of the buttonhole foot.
Bring the ends toward you under the buttonhole foot,
clearing the front end.
Hook the filler cord into the forks 4_)on the front of the
automatic buttonhole foot to hold ti_em tight.
Lower the needle into the garment where the buttonhole
wiit start, and lower the foot..
_; Spur
!_.) Forks
1_}Press the start/stop button and sew the buttonhole
Each side of the buttonhole and the bartacks will be
sewn over the cord.
Remove the fabric from the machine, and cut the sewing
threads only
(_ Needle thread (Top thread)
(_) Bobbin thread (Bottom thread)
Pull the loose ends of the filler cord to tighten it..
Tie the ends in a knot, or thread them through a hand-
sewing needler Draw them to the wrong side of the fabric
and knot.
f
J
39