Ata Pc Card (Optional); To Insert The Ata Pc Card; To Eject The Ata Pc Card; Selecting Card Designs - Kenmore 385.19005 Owner's Manual

I_
[_
I
ATA PC Card (Optional)
o To insert the ATA PC card
insert the SanDisk '-_CompactFlash that contains saved
stitch data into the SanDisk '_CompactFlash PC card
adapter Then insert the adapter into the slot with the front
side of card _:i..facing you.
Push the card until it clicks, and the eject button ,_ii_ pops
out
{i}_i} SanDistd;' CompactFlash PC card
When the card is properly set, the red bar on the eject
button (i_i will appear
_; Eject button
,_:,Red bar
• To eject the ATA PC card
Press the eject button J_)to eject the ATA PC card
Take out the ATA PC card from the machine.
Notes:
o Use only Sandisk'*':' C ompactFlash 128MB or smaller to
store stitch data,,
° Use only Sandisk '_'CompactFlash PC card adapter
Selecting Card Designs
After inserting a card into your machine, you can view and
select its designs in the embroidery mode,
Press the embroidery mode key _,,*to enter the embroidery
mode
(!) Embroidery mode key
_i_) ATA PC card key
Press the ATA PC card key _}_iThe patterns in the card are
displayed in the first page
CAUTION:
Do not turn the power off or eject the card while the
warning sign t_il):'_i!)or hourglass is displayed on the
visual touch screen, Otherwise, data stored in the
memory may be lost or damaged
65