Setting Spool Pins; Adjust The Presser Foot Lever; Thread Cutter - Kenmore 385.11607 Owner's Manual

SECTION 2. PREPARE THE MACHINE FOR SEWING
o Setting Spool Pin
f
t
Spool pin
The spool pins are used for holding the
spools of thread when feeding thread to the
machine.
To use, pull up the spool pins. Push down
for storage.
NOTE: Model 11607 has one spool pin.
Adjust the Presser Foot Lever
Normal up \
position _Hig[q.
High i'_ position
position
up
position
Presser foot
lever
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4" higher than the normal
up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser
foot.
• Thread Cutter
f-
cutter
You don't need a pair of scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches
before starting the next seam.
6