3M XT-1 Installation Manual page 39

3M Headset Intercom System Model XT-1 Installation Manual
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed
prompt to let customers know in your absence that the store is closed:
1. Enter the base station configuration mode, see page 29.
2. Change the value for
Closed" Prompt?
Pull Ahead Prompt
Perform the following procedure to enable or disable the automatic pull ahead
prompt to let customers know to pull ahead when they are at an out-of-service
customer order point in a tandem drive thru:
1. Enter the base station user service mode, see page 29.
2. Change the value for
Prompt (Tandem Only)?
Customer Order Point Prompt Language
Perform the following procedure to select the language(s) of the store closed and
pull ahead prompts. The prompts can be spoken in English, Spanish, French, or
repeated in multiple languages:
1. Enter the base station configuration mode, see page 29.
2. Change the value for
Prompts in English?
3. Press
Enter
change and leave the option at its previous setting.
4. Change the value for
Prompts in Spanish?
5. Press
Enter
change and leave the option at its previous setting.
6. Change the value for
Prompts in French?
Order Point TALK with No Vehicle
Perform the following procedure to permit or prevent the order taker to talk to
the order point when no vehicle is detected.
1. Enter the base station user service mode, see page 29.
2. Change the value for
With No Vehicle?
Order Takers in Cross Lane Mode
In systems with two customer order points, in Split Lane mode, you can specify
whether you would like to be able to permit communication between the two
split systems.
Perform the following procedure to enable or disable talk (T1/T2) buttons to be
able to speak on the lane to which it is not assigned.
1. Enter the base station configuration mode, see page 29.
2. Change the value for
CROSS Lane Mode?
Perform the following procedure to enable or disable paging to be heard by
operators on both lanes.
1. Enter the base station configuration mode, see page 29.
07 Global Settings
Yes No
to or .
07 Global Settings
Yes
to or
07 Global Settings
Yes No
to or
to implement the change or press
07 Global Settings
Yes No
to or
to implement the change or press
07 Global Settings
Yes No
to or
07 Global Settings
Yes No
to or .
07 Global Settings
YES NO
to or .
Configuration
"Store is Now
>
"Pull Ahead"
>
No
.
Order Point
>
.
to abandon the
Mode
Order Point
>
.
to abandon the
Mode
Order Point
>
.
Order Point TALK
>
Order Takers in
>
Rev 1.0 © 3M 2007 November
Page 39 of 54