3M XT-1 Technical Bulletin

3M™ Wireless Communication System Model XT-1 and G5
Technical Bulletin- #150
XT-1 and G5 Wireless Headsets, Battery, Battery Charger and Charging Station
– Semi-Annual Maintenance
The ear pads, ear cups, headband pad and windscreen foam pads on a XT-1 Wireless
headset should be inspected and if missing, replaced to provide comfort for the user and to
ensure proper operation. The batteries contacts should be cleaned if you see any dirt or
grease layered on the contacts. The battery charger should be checked to ensure proper
operation..
It is recommended that this be done on a monthly basis.
This document describes the maintenance procedure.
Frequency: Monthly
Time Required: 10 minutes to prepare
Time of day Evening after closing.
• Gather equipment to be inspected
Gather all headsets, batteries and battery charger.
Tip:
For 24-hour restaurants, clean equipment not in use first. Then swap out cleaned
equipment with equipment worn by crew members.
• Replace any parts missing on the headset
Verify that all headsets have windscreens, ear foam pads and cushions. If missing,
replace as needed, from the Manager's Service Kit.
Order Manager's Service Kit (SKU# 78-6911-4740-5) by calling 1-800-328-0033
10 minutes to complete
For 24-hour restaurants: during slow period