Video Loss - EverFocus eZ.HD ECOR HD 16X1 User Manual

6.4.2

Video Loss

You can enable the Video Loss Event function and configured the video loss event
notifications in this menu.
Camera: Select a camera to be configured.
Enable: Check the box to enable the Video Loss event settings for the selected camera.
Log: Check the box to record video loss events to log data.
Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5 seconds before the
video loss event occurs. Note that the pre-alarm recording rate will follow the Normal Speed configured in the
above section (see 6.2.1 Basic Setting).
Buzzer: Check the box to enable the buzzer when a video loss event is triggered.
Email Notify: Check the box to send email notification when a video loss event is detected. Email operation
requires valid email entered in the Email setup menu (see 6.7.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC when video loss event occurs. This
feature works with EverFocus' CMS software. You will need to configure the Alarm Server for the DVR to send
network alarms to the client PC (see 6.7.5 Alarm Server).
Alarm Output: Select an alarm output number. When an alarm is triggered, the signal will be transmitted
through the alarm output relay.
78
ECOR HD 16X1 DVR