Event; Alarm - EverFocus eZ.HD ECOR HD 16X1 User Manual

6.4 Event

You can configure the Alarm, Video Loss, Motion and Other settings in this menu.
6.4.1

Alarm

Alarm: Select an Alarm input number from 1 to 16.
Enable: Check the box to enable the Alarm trigger function for the selected alarm input.
Log: Check the box to record alarm events to log data.
Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5 seconds before the
alarm event occurs. Note that the pre-alarm recording rate will follow the Normal Speed configured in the
earlier section (see 6.2.1 Basic Setting).
Buzzer: Check the box to enable the buzzer when an alarm event is triggered.
Email Notify: Check the box to send email notification with a snapshot file when an alarm event is detected.
Email operation requires valid email entered in the Email setup menu (see 6.7.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC when an alarm event occurs. This
feature works with EverFocus' CMS software. You will need to configure the Alarm Server for the DVR to send
network alarms to the client PC (see 6.7.5 Alarm Server).
75
ECOR HD 16X1 DVR