Ez Controller (Control Camera Osd Setting From Dvr End) - EverFocus eZ.HD ECOR HD 16X1 User Manual

6.2.2.1 eZ Controller (Control Camera OSD Setting from DVR End)

Traditionally, the CCTV installer needs to take a portable monitor to connect to the camera
for controlling the camera OSD at the camera installation site as the
take extra effort, time and people to adjust the camera.
Now, EverFocus' eZ.Controller allows users to control the camera OSD simply on the monitor
at the DVR end as illustrated in
A Traditional Way to Control Camera OSD
Control Camera OSD at
DVR End
1. On the Adjust setting page. Select the camera you want to adjust.
2. Click the Advanced button, and the camera live view with its OSD menu will display as
the figure below.
3. You can easily use the direction buttons on the Coaxial Panel to control the camera's
OSD setting menu.
4. To exit the setting, click the Exit button to return to the Adjust setting page.
Diagram B.
Camera End
Camera End
70
Diagram A
B Use eZ.Controller to Control Camera OSD
Camera OSD Control Directly at
DVR End
ECOR HD 16X1 DVR
below. It will
DVR End
Camera End