Removing The Front Bezel; Installing The Front Bezel; Removing The Slim Line Optical Drive - Dell Precision Tower 5810 Owner's Manual

Removing the Front Bezel

1. Follow the procedures in
2. Remove the computer
3. Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel.
4. Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge
of the bezel from the chassis.

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front panel into the slots on the chassis front.
2. Rotate the bezel towards the computer to engage the front-bezel retention clips until they click into
place.
3. Install the computer
4. Follow the procedures in

Removing the Slim Line Optical Drive

1. Follow the procedures in
2. Remove the computer
3. Disconnect the data and power cables from the optical drive.
Before Working Inside Your
cover.
cover.
After Working Inside Your
Before Working Inside Your
cover.
Computer.
Computer.
Computer.
15