Nikon D700 User Manual page 179

❚❚ Copying White Balance from d-0 to Presets d-1–d-4
Follow the steps below to copy a measured value for white
balance from d-0 to any of the other presets (d-1–d-4).
1
Select L (Preset manual).
Highlight Preset manual in the
white balance menu (pg. 140)
and press 2.
2
Select a destination.
Highlight the destination
preset (d-1 to d-4) and press
the center of the multi
selector.
3
Copy d-0 to the selected
preset.
Highlight Copy d-0 and press
J. If comment has been
created for d-0 (pg. 158), the
comment will be copied to
the comment for the selected preset.
r
153