Table of Contents
Advertisement
SECTION 1. INTRODUCTION
1.1 DESCRIPTION
The Resistance Temperature Dector meter with Time Proportional is a
value packed indicator/ controller. Four full digits allow for an accurate
display of your temperature. Select from 2, 3, or 4 wire input
configuration. A fully scalable analog output is standard. You may
configure this output as a proportional controller, or to follow your display.
Dual 5 amp, form C relays outputs are also included with all units for
alarm or control of critical processes. Front panel peak detection and
memory is also standard. A mechanical lockout has been included to
guard against unauthorized changes.
1.2 STANDARD FEATURES
The following is a list of features:
*
4-digit, red, 14 segment LED Display
*
NEMA 4 / Type 4 Front Bezel
*
±0.5 °C accuracy
*
Peak Detection and Memory
*
Dual 5 amp, form C relay outputs
*
Scalable Analog output
*
Analog out proportional or time proportional control
*
Front panel controller tuning
*
Non-volatile memory-no battery backup
*
Easy setup for proportional control
*
115 or 230 Vac 50/60 Hz power supply or
10-32 Vdc or 26-56 Vdc
1
Advertisement
Table of Contents
