Table of Contents
Advertisement
C
Y
USTOMIZING
OUR
When enabling a new interface, it may be necessary to modify the stan-
dard factory settings to match your specific host system's communication
and symbology requirements. Check with your system administrator to
identify your host system's specific interface requirements to ensure that
they match the new interface you have selected. Also, the scanner's
operational features (e.g. speaker volume, radio channel frequency, etc.)
can be customized to match your unique requirements.
1. Use the labels in this manual to modify the standard configu-
ration to match your specific interface requirements or user
preference.
Ensure that your planned modifications are
compatible with the current interface. For
example, baud rate selections are only valid in
the RS-232 interface. The scanner will read
and seem to accept programming labels for
features invalid to the current interface, how-
ever the feature will not be modified.
2. Enable any additional symbologies as required and exit
Programming Mode.
3. Scan a regular barcode label and verify that the scanner and
host communicate correctly.
4. You have completed the factory settings change procedure.
If you experience difficulties, have questions or require additional infor-
mation, contact your local distributor using the listings located on the back
cover of this guide.
R44-1027
S
O
CANNER
PERATION
NOTE
3
Advertisement
Table of Contents
