Table of Contents
Advertisement
C
Y
USTOMIZING
OUR
Every time you change the active interface, a new set of factory settings
are enabled (refer to Appendix A, Standard Factory Settings, for a com-
plete list) and any changes that you want to make must be made to that
interface's factory settings. Previous changes made to other interface
settings are stored as that specific interface's configuration settings for
future use when you re-enable that interface. This allows the scanner to
retain a special configuration file for each interface.
Once you have changed cables and enabled the new interface, it may be
necessary to modify the standard factory settings to match your specific
host system's communication and symbology requirements. Check with
your system administrator to identify your host system's specific interface
requirements to ensure that they match the new interface you have
selected. Also, the scanner's operational features (e.g. speaker tone and
volume) can be customized to match your unique requirements.
1. Use the labels in this manual to modify the standard configu-
ration to match your specific interface requirements or user
preference.
2. Enable any additional symbologies as required and exit
Programming Mode.
3. Scan a regular barcode label and verify that the scanner and
host communicate correctly.
4. You have completed the factory settings change procedure.
If you change the interface again, these settings will be saved as the
default settings for this interface only.
R44-1020
S
O
CANNER
PERATION
If you experience difficulties, have ques-
tions or require additional information,
contact your local distributor or PSC
Customer Support Services at
1-800-547-2507.
5
Advertisement
Table of Contents
