Compliance Statements; Liability Statement - DataCard SR200 User Manual

Compliance Statements

Liability Statement

The WARNING and CAUTION labels have been placed on the equipment for your safety. Please do
not attempt to operate or repair this equipment without adequate training. Any use, operation or
repair in contravention of this document is at your own risk.
Safety
All Datacard® products are built to strict safety specifications in accordance with CSA/UL60950‐1
requirements and the Low Voltage Directive 2006/95/EC.
Therefore, safety issues pertaining to operation and repair of Datacard® equipment are primarily
environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and maintenance of
Datacard® equipment.
Connect equipment to a grounded power source. Do not defeat or bypass the ground lead.
•
Place the equipment on a stable surface (table) and ensure floors in the work area are dry and
•
non‐slip.
Know the location of equipment branch circuit interrupters or circuit breakers and how to turn
•
them on and off in case of emergency.
Know the location of fire extinguishers and how to use them. ABC type extinguishers may be
•
used on electrical fires.
Know local procedures for first aid and emergency assistance at the customer facility.
•
Use adequate lighting at the equipment location.
•
Maintain the recommended temperature and humidity range in the equipment area.
•
iii