Deleting a Magnetic Stripe Encoder Configuration
1.
Open an ID Works project that has a card design with a magnetic stripe field.
2.
Select the magnetic stripe field and open the Edit Field Properties [Magnetic Stripe] dialog
box. Refer to the online help topic "Add a magnetic stripe field to a card" for step‐by‐step
instructions.
3.
On the Encoding tab, select Datacard SR‐CR retransfer magnetic stripe plug‐in from the
Device list.
4.
Click Edit Configurations. The Datacard SR‐CR retransfer magnetic stripe Configurations
dialog box opens.
5.
Select the configuration you want to delete and click Remove.
A confirmation dialog box opens.
6.
Click Yes to remove the configuration.
7.
Click Exit to close the Datacard SR‐CR retransfer magnetic stripe Configurations dialog box
and then click OK to close the Edit Field Properties [Magnetic Stripe] dialog box.
12
SR200 & SR300 Plug-in User's Guide