Creating a New Magnetic Stripe Encoder Configuration
To create a new configuration by copying an existing configuration, refer to
Magnetic Stripe Encoder Configuration" on page 10
1.
Open or create an ID Works project that has a card design with a magnetic stripe field.
2.
Select the magnetic stripe field and open the Edit Field Properties [Magnetic Stripe] dialog
box. Refer to the online help topic "Add a magnetic stripe field to a card" for step‐by‐step
instructions.
3.
On the Encoding tab, select Datacard SR‐CR retransfer magnetic stripe plug‐in from the
Device list.
4.
Click Edit Configurations. The Datacard SR‐CR magnetic stripe Configurations dialog box
opens.
5.
Click New. The New Magnetic Stripe Configuration dialog box opens.
SR200 & SR300 Plug-in User's Guide
.
"Changing a
9