Sending Cards to the Printer
To print a card from your Datacard ID software application, select File > Print. Select an available
SR200 or SR300 card printer, set the print options, then click OK.
Printing Multiple Copies of Cards
When a production operator specifies that two or more copies of a card be printed, the method
of fulfilling the request depends on the features included on the card:
If the card does not have a smart card chip, the plug‐in sends the number of copies specified
to the printer driver and creates a single print job.
If the card has a smart card chip, the Datacard ID software creates one print job for each copy
of each card.
Distributing the ID Works Project and Encoder
Configuration
If your project will be used in multiple locations, you must distribute both the ID Works project
and any encoder configurations you may have changed or created for your card designs.
Distributing the ID Works Project
ID Works users can use the Export and Import utilities in the ID Works Administrator application
to distribute projects. Refer to the Administrator online help topics "Export a project" and
"Import a project" for step‐by‐step instructions.
Distributing the WebID Project
WebID users must use Windows® Explorer to copy the entire project folder to the WebID Server.
On the WebID Server, the default location of the ID Works project is C:\Inetpub\wwwroot\Id
Works\Projects.
The default location for the project folder on the WebID Workstation PC where it was
designed is in the Shared Documents subfolder, Datacard\ID Software\Projects.
On the ViaNet Server it must be placed in Inetpub\wwwroot\ID Works\ Projects\<Project
Name>.
14
SR200 & SR300 Plug-in User's Guide