Viewing The Current Plug-In Assignments; Assigning The Printer Plug-Ins - DataCard SR200 User Manual

Viewing the Current Plug-in Assignments

When printing a card, you can determine if the correct Datacard printer plug‐ins are being used:
1.
Open a card project and select File > Print in the Datacard ID software application.
The Print Card(s) dialog box displays the name of the printer plug‐in being used.
If Datacard SR‐CR retransfer printer plug‐in is not displayed, you must manually assign the
plug‐in to the printer. (Refer to "Assigning the Printer Plug‐ins" below.)
This is the wrong plug‐in. The
printer uses this generic printer
plug‐in if the Datacard SR‐CR
retransfer printer plug‐in has not
been assigned to the printer.
2.
Click OK to print the card.
3.
Examine the printed card for problems.
If you find elements of the card that did not print or encode correctly, it could be that the
wrong plug‐in is being used. Refer to "Assigning the Printer Plug‐ins" below to verify the
printer plug‐in or to assign the correct Datacard printer plug‐in to the printer.

Assigning the Printer Plug-ins

If the Datacard plug‐ins were not assigned when your printer was installed, you can use the
Assign Printer Plug‐ins utility to specify associations between available printer plug‐ins and
installed printers.
How you access the utility depends on which Datacard ID software product you are using:
In the ID Works or ID Centre suite, log on to the Administrator application. From the Printing

menu, select Assign Printer Plug‐ins. Refer to the Administrator online help topic "Assign
printer plug‐ins" for step‐by‐step instructions.
WebID users can access the Assign Printer Plug‐ins utility through the Datacard Workstation

Utility.
SR200 & SR300 Plug-in User's Guide 3