Table of Contents
Advertisement
VIVOTEK
2. Place a sheet of paper of white or cooler color temperature, such as blue, in front of the lens, then
allow the Network Camera to adjust the color temperature automatically.
3. Select Keep current value, and click the Save button to preserve current configuration.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.
■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes. When completed with the settings on this page, click Save to enable the
setting and click Close to exit the page.
Privacy mask
Advanced Mode
Click Privacy Mask to open the settings page. On this page, you can block out certain sensitive zones to
address privacy concerns.
■ To set the privacy mask windows, follow the steps below:
1. Click New to add a new window.
2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover.
3. Enter a Window Name and click Save to enable the setting.
4. Check Enable privacy mask to enable this function.
NOTE:
► Up to 5 privacy mask windows can be configured on the same screen.
► If you want to delete a configured mask window, click on the 'X' button at the upper right corner of the
window.
70 - User's Manual
Advertisement
Table of Contents
