Table of Contents
Advertisement
Joystick Settings
Enable Joystick
Connect to the USB plug of the joystick to a USB port on your management computer. Supported by
the plug-in in the main page (Microsoft's DirectX), once the plug-in in the main page is loaded, it will
automatically detect if there is any joystick on the computer. The joystick should work properly without
installing any other driver or software.
Then you can begin to configure the joystick settings of connected devices. Please follow the instructions
below to enable joystick settings.
1. Right-click on a live view window. Select Joystick Settings. If your joystick is working properly, it will be
displayed on the drop-down list.
c. Select the joystick you want to configure. Check Enable Joystick, then click Configure Buttons to
open Buttons configuration window.
VIVOTEK
User's Manual - 23
Advertisement
Table of Contents
