Table of Contents
Advertisement
VIVOTEK
3. Attach a LAN cable between your wireless camera and router/switch. Use the IW2 utility in the product
CD to locate the camera in LAN. Double-click on the IP address to start an IE session with the
camera.
4. Enter the Configuration > Wireless menu, and enter the name (SSID) of the existing wireless
network, channel number, and other related information. See the following pages for more details. You
may enter the Configuration > Network page to setup DHCP or static IP if necessary.
5. Disconnect DC power and LAN cable from camera, and re-connect the DC power to boot the camera.
Your IW2 utility should then be able to locate your wireless camera.
For detailed configuration options, please refer to the following pages.
Every time the camera is restarted by reconnecting power, network connection is ready when the camera
starts the initial pan/tilt calibration.
58 - User's Manual
Advertisement
Table of Contents
