Automatic Preset Tuning (Fm Stations Only); Manual Tuning Preset - Yamaha R-N301 Owner's Manual

Listening to FM/AM radio
Automatic preset tuning
(FM stations only)
You can use the automatic preset tuning function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and store up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its preset number.
Notes
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• If the station you want to store is weak in signal strength, try
using the manual preset tuning method.
y
• FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
• (U.K. model)
Only Radio Data System broadcasting stations are stored
automatically by the Auto Preset function.
MODE
FM
FM
AM
AM
POP-UP MENU
Cursor keys B / C
ENTER
SETUP
OPTION
OPTION
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION on the remote control.
The "Option" menu is displayed (p.34).
3
Press B / C to select "Auto Preset", and then
press ENTER.
Option
¡Auto¡Preset
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down the
ENTER key.
18
En
TUNER CD
TUNER
TUNING
PRESET
PRESET j / i
HOME NOW PLAYING
ENTER
RETURN
RETURN
MUTE
VOLUME
SP A
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i or cursor key (B/C) on the
remote control.
• To cancel scanning, press FM, AM or RETURN.
Ready
¡01:FM¡87.50MHz
Preset number
When scanning is complete, "FINISH" is displayed
and then the display returns to original state.

Manual tuning preset

You can manually register up to 40 FM/AM stations
(40 total). You can then easily recall any preset station by
selecting its preset number.
STANDBY/ON
DISPLAY FM MODE MEMORY
BASS
PHONES SPEAKERS
A B
MEMORY
■ Registering a radio station manually
Select a radio station manually and register it to a preset
number.
1
Follow "FM/AM tuning" (p.17) to tune into the
desired radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number
"01". Thereafter, each radio station you select will be
registered to the next empty (unused) preset number
after the most recently registered number.
¡98.50
01¡:FM¡98.50MHz
Preset number
y
To select a preset number for registering, press MEMORY once
after tuning into the desired radio station, press PRESET j / i to
select a preset number, and then press MEMORY again.
¡98.50
02¡:Empty
"Empty" (not in use) or the frequency currently registered
SP A
Frequency
FM/AM PRESET TUNING
VOLUME
SELECT
TREBLE INPUT PUSH - ENTER
RETURN
PRESET j / i
STEREO SP A
TUNED
STEREO SP A
TUNED