Automatic Preset Tuning (Fm Stations Only) - Yamaha r-n602 Owner's Manual

Listening to FM/AM radio
■ Improving FM reception (FM mode)
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
DIMMER DISPLAY MODE MEMORY
INPUT BASS
PHONES SPEAKERS
A B
5V 1A
MODE
1
Press MODE repeatedly to select "Stereo"
(automatic stereo mode) or "Mono"
(monaural mode) when this unit is tuned in to
an FM radio station.
When Mono is selected, FM broadcasts will be heard
in monaural sound.
Note
The STEREO indicator on the front panel lights up while
listening to a station in stereo mode.
Automatic preset tuning
(FM stations only)
You can use the automatic preset tuning function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and register up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its preset number.
Notes
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• If the station you want to register is weak in signal strength, try
using the manual preset tuning method.
y
FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
26
En
PURE DIRECT
CLEAR BAND PRESET TUNING
VOLUME
TREBLE BALANCE LOUDNESS SELECT
PUSH - ENTER
FLAT
-30dB
RETURN
CONNECT
L R
LINE 1
TUNER
TUNER
BAND
BAND
MEMORY
Cursor keys B / C
ENTER
HOME
SETUP
NOW PLAYING
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION on the remote control.
The "Option" menu is displayed (p. 44).
3
Press B / C to select "Auto Preset", and then
press ENTER.
OPTION
Auto Preset
READY
01:FM 87.50MHz
Preset number
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down ENTER.
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i or cursor key (B/C) on the
remote control.
• To cancel scanning, press BAND or RETURN.
When scanning is complete, "FINISH" is displayed and
then the display returns to original state.
LINE 2 LINE 3
NET USB
TUNING
PRESET j / i
PRESET
ENTER
RETURN
RETURN
OPTION
OPTION
VOLUME
MUTE
A
VOL.
A
VOL.
Frequency