Eco Dect - Gigaset S820A Setup & User Manual

ECO DECT
Restoring the phone to the factory settings
You can reset individual changes to the base and handset separately.
The following are not affected by the reset:
u
Date and time
u
Settings for the configurable page
u
Registrations of handsets to the base and the current base selection
u
System PIN
u
Entries in the calendar and in the contacts
u
Redial list
u
Stored external and internal destination numbers for the baby phone (Alarm To is reset to
External),
u
Destination number for call divert
Resetting the handset (Handset Reset) deletes your audio and display settings.
Resetting the base (Base Reset) resets the settings for ECO DECT, answering machine, system
settings and the internal names of handsets, and also deletes call/answering machine lists.
Resetting the handset/base
Menu key v ¤
Settings menu page
¤ For Base Reset: Enter the system PIN è
ECO DECT
ECO DECT indicates low energy consumption and reduced transmission power.
Reduced transmission power (radiation)
In normal operation mode (factory setting):
On delivery, the device is set to maximum range. This guarantees optimised wireless manage-
ment. The handset does not emit a signal in idle status (no radiation). Only the base ensures con-
tact with the handset is maintained through low-strength wireless signals. During a call the
strength of the wireless signal is adapted automatically to the distance between the handset
and base. The smaller the distance between the handset and base, the lower the transmission
power.
You can further reduce the transmission power as follows:
Reducing the range to decrease transmission power by up to 80%
Many apartments, business premises, offices, etc., do not need the maximum range. If you deac-
tivate the Max. Range setting, transmission power during a call is reduced to 80% at half the
range.
Menu key v ¤
Settings menu page
Display icon for reduced range
34
¤
Ê
System
¤
Answer Yes to the security prompt
¤
Ê
System
¢
page 55.
¤ ¤
Resets Handset Reset/Base Reset
¤ ¤
Eco Mode Max. Range on/off
en fr es