Panasonic Vericam 35 Operating Manual page 86

Item
[REAR2 LEVEL]
[FRONT1 VR]
[FRONT2 VR]
[REAR1 VR]
[REAR2 VR]
[FRONT1 LIMITER]
[FRONT2 LIMITER]
[REAR1 LIMITER]
[REAR2 LIMITER]
[HEADROOM]
[AUDIO OUTPUT] [MONITOR SEL1]
[MONITOR SEL2]
[MONITOR DELAY]
[MONITOR VR]
[ALARM]
[CONTROL DISPLAY] [BRIGHTNESS]
[COLOR LEVEL]
[CONTRAST]
[BACK LIGHT]
[BUTTON LED]
[STATUS]
Chapter 10 Menu Operations — Menu list
Sets the level adjustment method of the rear microphone 2 to manual or automatic.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
Performs adjustments in this item when the level adjustment method of the front microphone 1 is set to
[MANUAL].
[0]...[100]
f Factory setting: [70]
Performs adjustments in this item when the level adjustment method of the front microphone 2 is set to
[MANUAL].
[0]...[100]
f Factory setting: [70]
Performs adjustments in this item when the level adjustment method of the rear microphone 1 is set to
[MANUAL].
[0]...[100]
f Factory setting: [70]
Performs adjustments in this item when the level adjustment method of the rear microphone 2 is set to
[MANUAL].
[0]...[100]
f Factory setting: [70]
Enables/disables the limiter of front microphone 1.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter of front microphone 2.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter of rear microphone 1.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter of rear microphone 2.
[ON], [OFF]
f Factory setting: [OFF]
Sets the headroom (standard level).
[18dB], [20dB]
f Factory setting: [20dB]
Sets the audio channel to be output from the <PHONES> terminal.
[CH1/2]: Outputs audio channel 1/2.
[CH3/4]: Outputs audio channel 3/4.
f Factory setting: [CH1/2]
Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.
When [MONITOR SEL1] is set to [CH1/2]:
[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]
When [MONITOR SEL1] is set to [CH3/4]:
[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]
f Factory setting: [STEREO CH1/2] or [STEREO CH3/4]
Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.
[ON], [OFF]
f Factory setting: [OFF]
Adjusts the level of audio to be output from the <PHONES> terminal.
[0]...[100]
f Factory setting: [70]
Sets the volume of the warning sound to be output from the <PHONES> terminal.
[LOUD], [MIDIUM], [SMALL], [OFF]
f Factory setting: [MIDIUM]
Adjusts the brightness of the control panel.
[−15]...[15]
f Factory setting: [0]
Adjusts the color levels of the control panel.
[−15]...[15]
f Factory setting: [0]
Adjusts the contrast of the control panel.
[−30]...[30]
f Factory setting: [0]
Sets the brightness of the control panel backlight.
[−1]: Darkens the display more than normal.
[0]: Normal brightness.
[1]: Brightens the display more than normal.
f Factory setting: [0]
Illuminates each button of the control panel and camera module.
[ON], [OFF]
f Factory setting: [ON]
Press the <VIEW> button to set whether to show the status display when a camera video is displayed on
the control panel.
[ON], [OFF]
f Factory setting: [ON]
– 86 –
Description of settings