Panasonic Vericam 35 Operating Manual page 94

Item
[Mg-B (PHASE)]
[B (SAT)]
[B (PHASE)]
[B-Cy (SAT)]
[B-Cy (PHASE)]
[Cy (SAT)]
[Cy (PHASE)]
[Cy-G (SAT)]
[Cy-G (PHASE)]
[G (SAT)]
[G (PHASE)]
[G-Yl (SAT)]
[G-Yl (PHASE)]
[Yl (SAT)]
[Yl (PHASE)]
[Yl-R (SAT)]
[Yl-R (PHASE)]
[SKIN CORRECTION] [SKIN AREA SW]
[SKIN AREA HUE]
[SKIN AREA TONE]
[EXT.FUNC] [FOCUS DISP]
[LENS SETTING] [A.IRIS TYPE]
[A.IRIS LEVEL EFFECT] Sets the target value during auto iris operation.
[A.IRIS SPEED]
Chapter 10 Menu Operations — Menu list
Corrects the hue between magenta and blue.
[−63]...[63]
f Factory setting: [0]
Corrects blue color saturation.
[−63]...[63]
f Factory setting: [0]
Corrects the blue hue.
[−63]...[63]
f Factory setting: [0]
Corrects the color saturation between blue and cyan.
[−63]...[63]
f Factory setting: [0]
Corrects the hue between blue and cyan.
[−63]...[63]
f Factory setting: [0]
Corrects cyan color saturation.
[−63]...[63]
f Factory setting: [0]
Corrects the cyan hue.
[−63]...[63]
f Factory setting: [0]
Corrects the color saturation between cyan and green.
[−63]...[63]
f Factory setting: [0]
Corrects the hue between cyan and green.
[−63]...[63]
f Factory setting: [0]
Corrects green color saturation.
[−63]...[63]
f Factory setting: [0]
Corrects the green hue.
[−63]...[63]
f Factory setting: [0]
Corrects the color saturation between green and yellow.
[−63]...[63]
f Factory setting: [0]
Corrects the hue between green and yellow.
[−63]...[63]
f Factory setting: [0]
Corrects yellow color saturation.
[−63]...[63]
f Factory setting: [0]
Corrects the yellow hue.
[−63]...[63]
f Factory setting: [0]
Corrects the color saturation between yellow and red.
[−63]...[63]
f Factory setting: [0]
Corrects the hue between yellow and red.
[−63]...[63]
f Factory setting: [0]
Enables/disables the function which makes fine adjustments of near skin tone colors.
[ON], [OFF]
f Factory setting: [OFF]
Makes fine adjustments in hue.
[−63]...[63]
f Factory setting: [0]
Makes fine adjustments in tone.
[−63]...[63]
f Factory setting: [0]
Sets the unit that displays the focus distance.
[Meter], [Feet]
f Factory setting: [Feet]
Determines whether to set the speed control to the lens volume and use the value set in the menu.
[LENS], [CAM]
f Factory setting: [LENS]
[0] - [100]
f Factory setting: [30]
Sets the speed when the [A.IRIS TYPE] is set to [CAM].
[1] - [20]
f Factory setting: [10]
– 94 –
Description of settings