Panasonic Vericam 35 Operating Manual page 89

Item
[GENLOCK] [GENLOCK MODE]
[H PHASE COARSE]
[H PHASE FINE]
[INFORMATION] [OPERATION TIME]
[VERSION]
[UPDATE]
[ONLINE SUPPORT]
[TRACE LOG]
[SENSOR TEMP]
[FAN]
[CARDS/MEDIA] [CPS PASSWORD]
[FORMAT CARD]
[MEDIA END ALARM]
[USER SWITCHS] [USER1]
[USER2]
[USER3]
[USER4]
[USER5]
[USER6]
Chapter 10 Menu Operations — Menu list
Switches the synchronization signal of the camera signal.
[INT]: Synchronizes to the internal standard signal.
[EXT]: Synchronizes to the entered external standard signal.
f Factory setting: [INT]
Roughly adjusts to match horizontal synchronization phase when building a system.
[−100]...[100]
f Factory setting: [0]
Minutely adjusts to match horizontal synchronization phase when building a system.
[−100]...[100]
f Factory setting: [0]
Displays the operation time of the camera.
Displays the information of the camera.
[VERSION]: Displays the version.
[MODEL NAME]: Displays the product name.
[SERIAL NO.]: Displays the serial number.
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
Switches the camera to the PASS (P2 Asset Support System) function mode.
Reads the camera's execution log from an SD memory card.
Displays the ambient temperature detected by the camera module's sensor.
Sets the fan operation status.
[AUTO]: Controls the number of rotations according to the operation mode of the unit.
[ON]: Always rotates at high speed.
f Factory setting: [ON]
Sets the CPS encryption password for the expressP2 memory card and the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
Formats the card in the specified slot after the format menu is selected.
[MAIN SLOT1], [MAIN SLOT2], [SUB SLOT3], [SUB SLOT4], [SD CARD]
When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
Sets whether to generate an alarm sound when there is no remaining free space in the expressP2 memory
card or the microP2 memory card.
[ON], [OFF]
f Factory setting: [ON]
Sets the function to be assigned to the USER <1> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the USER <2> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the USER <3> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the USER <4> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR],
[SMOOTH MODE]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR],
[SMOOTH MODE]
f Factory setting: [INHIBIT]
– 89 –
Description of settings