Panasonic Vericam 35 Operating Manual page 61

[MENU] is also displayed on the camera's operation panel.
[EVF MENU] operation
1
Press and hold the <EVF MENU> button for at least two seconds.
[EVF MENU] is displayed.
[EVF MENU] list
r [DISPLAY SETUP]
Item
[CONTRAST]
[BRIGHT]
[COLOR]
[R BRT]
[G BRT]
[B BRT]
r [SW MODE]
Item
[FALSE COLOR TYPE]
[FRONT TALLY]
[EYE SENSOR]
[B/W]
[SCAN]
r [USER SW 1]/[USER SW 2]
Selects the function assigned to the <EVF USER 1>/<EVF USER 2> button.
The settings configured here are applied to the settings in the camera's [MENU] → [VF SDI SETTINGS] mutually.
(excluding [FALSE COLOR])
[MARKER]: Displays/hides markers.
[CENTER MARKER]: Displays/hides the center marker.
[SAFETY MARKER]: Switches the display/hide of the safety marker.
[FRAME MARK]: Displays/hides the frame marker.
[USER BOX]: Displays/hides the user box.
[ZEBRA]: Displays/hides the zebra display.
[EXPAND]: Enables/disables the display enlargement function.
[ASSIST]: Enables/disables the focus assist function.
[FALSE COLOR]: Enables/disables false color mode.
[SURROUND VIEW]: Enables/disables the surround view function.
[SURROUND VIEW LINE]: Displays/hides the surround view area marker display.
[SMOOTH MODE]: Enables/disables the smooth mode.
[WFM]: Displays/hides waveform monitor.
r [INFORMATION]
Item
[OPERATION TIME]
[VERSION]
Chapter 7 Viewfinder — Viewfinder status display
Adjusts the contrast.
[−32]...[31]
f Factory setting: [0]
Adjusts the brightness.
[−32]...[31]
f Factory setting: [0]
Adjusts the color level.
[−32]...[31]
f Factory setting: [0]
Adjusts the red color brightness.
[−32]...[31]
f Factory setting: [0]
Adjusts the green color brightness.
[−32]...[31]
f Factory setting: [0]
Adjusts the blue color brightness.
[−32]...[31]
f Factory setting: [0]
Selects the color type of the false color.
[1]/[2]
Enables/disables the front tally lamp function.
[ON]/[OFF]
Sets sensitivity of eye sensor.
[NORMAL]: Displays the viewfinder screen according to the eye sensor.
[10SEC]: Keeps the viewfinder screen display for 10 seconds after the eye sensor is released.
Switches to monochrome mode.
[ON]: Display will be all black and white.
[OFF]: Disables the monochrome mode.
Reverses the display.
[NORMAL]/[REVERSE]
Description of settings
Displays the total display time of the organic EL panel of the viewfinder.
Displays the firmware version of the viewfinder.
– 61 –
Description of settings
Description of settings
Description of settings