Panasonic Vericam 35 Operating Manual page 110

Display
[NO SD CARD!]
[NOT SELECTED!]
[SAME CLIP IS SELECTED!]
[TOO MANY CLIPS!]
[UNKNOWN CONTENTS FORMAT!]
[UNKNOWN DATA!]
[USER CLIP NAME MODIFIED!]
[WRITE PROTECTED!]
During soft keyboard operation
Display
[AUTHENTICATION ERROR!]
[CANNOT CHANGE!]
[CANNOT SET!]
[INVALID VALUE!]
[CANNOT SET!]
[NO INPUT!]
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
Chapter 11 Maintenance and Inspection — Warning system
Description
No SD memory card.
Attempted to delete without selecting clips.
Multiple instances of the same clip (copies) are included
in the clips selected.
Too many clips are selected.
This is a warning of the contents for the version that is
not supported by the camera.
The metadata character code is invalid.
There is a problem with data in the file.
When adding a counter value to the clip name,
characters must be deleted.
The P2 card or SD memory card is write-protected.
Description
Manual authentication failed.
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
The entered value is invalid.
There is not input to the software keyboard.
The re-entered password is different.
– 110 –
Behavior and cause
Insert an SD memory card.
Select clips to delete.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
Reduce the number of selected clips.
Match the device and content versions.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
Create the file again.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
Insert write-accessible media.
Behavior and cause
Enter the correct password.
Enter the [TEXT] (text information) first.
Change the input value.
Enter the password.
Enter the correct reference password.