Getting Started; Filling The Water Tank; Filling The Detergent Tank - Vax Grime Pro User Manual

Getting Started

Operating your steam cleaner
NOTE: Whilst in use do not recline unit more than 45 degrees.
CAUTION: Do not use hot or boiling water to fill water compartment. Do not open the water tank lid when using the steamer. Your steamer
is pressurised, do not completely remove the lid when tank is hot. Fill tank only when cool. Do not overfill the water or detergent tank
compartments.
IMPORTANT: After use, switch off the machine, compress the trigger to release all remaining steam. Allow machine to cool for a
minimum of 10 minutes before refilling or storing.

Filling the water tank

Place steamer on a level surface and ensure
steamer is switched off and is cool. To remove
lid push down and twist anti clockwise.
Slowly pour water into water tank.
Do not overfill the water tank. Allow
space to be left at the top.

Filling the detergent tank

Squeeze tabs on side of detergent tank
to slide tank out of steamer.
5
Ensure the lid is securely fastened by
turning in a clockwise direction.
Remove cap from detergent tank and fill with
maximum 120ml of Vax detergent. Replace cap
firmly and slide solution tank back into steamer
NOTE: For best results, fill with 120ml of detergent.
Alternatively dilute the mixture with 50ml detergent
and 70ml water
Fill measuring jug with maximum 300ml.