How To Use
Operating your steamer
er
Plug in steamer and switch on
at the mains.
Depress the trigger to release steam/
steam+detergent from the nozzle.
vax.com.au
After you plug in and switch on your
machine you will see a blue LED which
indicates water is being heated. After 5
minutes a green LED will indicate that your
steamer is ready to use.
If you wish to clean with steam alone
(no solution), simply turn the Detergent
Control Dial to OFF.
If you wish to clean using Vax Solution,
simply turn the Detergent Control Dial
to the desired setting. When pressing
the Steam Trigger, the steam cleaner
will release the amount of solution that
is indicated on the Detergent Control
Dial as well as steam.
6