Getting To Know Your Machine; Getting Started; Assembling Your Steamer; Technical Specification - Vax SCSMV1SG Manual

Getting to know your machine

Handle
Handle release button
Handheld handle
Handheld steam trigger (hidden)
On / off & steam control dial
Power on indicator
Water tank cap
Water tank (Part of unit)
Floorhead
Carpet Glider

Technical Specification

Name Steam Clean Multi S85-CM Name Steam Glide SCSMV1SG
Voltage 220-240v˜50Hz Voltage 220-240v˜50Hz
Wattage 1300w Wattage 1300w
Cord length 5m Cord length 5m
Weight 2.5kg Weight 2.5kg
Subject to technical change without notice. * To purchase consumables and accessories, please visit
Quick release cord hook
Quick release cord hook
Accessory floorhead
release button
Accessories & Consumables
Microfibre Pads (Type 1)
1-1-131448-00
Pro Cleaning Pads (Type 6)
1-1-132319-01
Coral Cleaning Pads (Type 3)
1-1-131643-00
Carpet Glider (Type 3)
1-1-133527-00
vax.co.uk
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you Begin
CAUTION
• The steamer and accessories get very hot during use, always allow them to cool down before handling.
• Always unplug and switch off the steamer when assembling or disassembling.
• Always switch off the steamer before emptying the water tank or changing the cloths/accessories.
IMPORTANT
• Please refer to floor manufacturer's care recommendations before use and test the steamer on a hidden area of flooring
to begin with.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don't aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet or floorhead
from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will switch off.
If this happens turn off and unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.
• Don't use hot or boiling water to fill or clean water tank.

Assembling your steamer

Push the main body down into the Push the handle into main body until it
floorhead until it clicks into place. clicks into place. The collar should be gripped
when connecting or releasing the handle.

Getting started

Stand the steamer upright by pushing the
main body forward to lock into position.