Getting Started; Assembling - Vax Steam Clean Multi S85-CM Let's Get Started

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you Begin
WARNING
• The steamer and accessories get very hot during use, always allow them to cool down before handling.
• Always unplug and switch off the steamer when assembling or disassembling.
• Always switch off the steamer before emptying the water tank or changing the cloths/accessories.
IMPORTANT
• Please refer to floor manufacturer's care recommendations before use and test the steamer on a hidden area of flooring
to begin with.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don't aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet or floorhead
from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will switch off.
If this happens turn off and unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.
• Don't use hot or boiling water to fill or clean water tank
Assembling your steamer
Push the main body down into the
floorhead until it clicks into place.
Push the handle into main body until it
clicks into place. The collar should be gripped
when connecting or releasing the handle.

Getting started

Stand the steamer upright by pushing the
main body forward to lock into position.