Table of Contents
Advertisement
3. Selecting Finishing Modes (Cont.)
Staple sort mode (optional)
When the 2-Bin Finisher or the 2-Bin Saddle Stitch Finisher (both optional) is installed, automatic stapling
is enabled. You can select the stapling position from three types.
•
The paper weight applicable for this mode is 17 to 28 lb. Bond.
•
Special paper such as OHP films or sticker label cannot be used for stapling.
•
Copies in different size cannot be stapled.
When the lengths of the copies are the same, they can be stapled even if their sizes are different.
(Example of selecting the [FRONT STAPLE] button)
3
Setting the staple sort mode
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance.
(
P.61 "6.Bypass Copying")
2
Place the original(s).
3
Press the finisher button on the basic menu.
86
3. SETTING OF BASIC COPY MODES
AB
Advertisement
Table of Contents
