Setting copy paper (size change) / Setting the drawer for special uses
When setting or adding copy paper in the drawer, follow the procedure below.
Placing paper in the drawer
1
Turn the power ON.
2
Pull out the drawer carefully until it
comes to a stop.
A: Slide rails
• Be careful not to touch the slide rails of the drawer.
3
Push the lower part of the end guide in
the direction of the arrow to remove it,
then reinstall it at the desired paper size
(indicated on the bottom inner surface on
the drawer).
4
Push the arrow part (right side) of the
side guide to unlock it.
1
A
35