Table of Contents
Advertisement
4. Setting Copy Paper (Cont.)
Panasonic-recommended paper / Handling and storing paper
Recommended paper
1
To make copies with a fine image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
Paper type
Plain paper
Thick
Tab paper
Tracing paper
Sticker labels
*
OHP film
*
Only Panasonic-recommended OHP film should be used. Using any other film may cause a malfunc-
tion.
Handling and storing paper
Pay attention to the following points:
•
Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
•
Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
•
Paper should be wrapped in its wrapping and stored in a damp-free place.
•
To prevent paper from being folded or bent, store it evenly on a flat surface.
34
1. BEFORE USING EQUIPMENT
Panasonic recommendations/Manufacturer
TIDAL/Hammermill (20 lb. Bond)
Laser/Hammermill
Exact Index/WAUSAU
CopyTabs/Blanks USA
Tracing Paper/Ostrich International (20 lb. Bond only)
5165/Avery
PP2500L/3M
X-10.0/Folex
(24 lb. Bond)
(32 lb. Bond)
(90 lb. Index)
(110 lb. Index)
Mode
PLAIN
THICK1
THICK2
THICK2
THICK3
TAB
PLAIN
THICK2
OHP FILM
OHP FILM
Advertisement
Table of Contents
