Hoover Globe User Instructions page 6

UPRIGHT LOCK RELEASE
Unlock the cleaner by pressing the upright lock pedal
at the rear of the cleaner with your foot.
After use return the cleaner to the upright lock position.
You will hear an audible click once locked in place.
POWER SWITCH
To switch the cleaner on or off, press the power switch
on the main body of the cleaner.
Globe manual.indd 6
CARPET CARE CONTROL SELECTOR
The carpet care control selector raises and lowers the
height of the cleaner.
Ensure that the cleaner is in an upright (parked)
position before selection.
Slide the knob to position best suited to depth of carpet
pile.
Try various settings until you get the best results for
your carpet.
NOTE: Using this cleaner for loop carpets or carpets
with pile greater than 30mm is not recommended.
Please consult the floorcare/carpet manufacturer's
recommended cleaning instruction before vacuuming.
!
!
IMPORTANT! When cleaning hard floors
such as vinyl or linoleum, move the selector
knob to the LONG PILE position. Failure to
do so may cause damage to the floor
surface.
- 6 -
ACTIVE STEERING
The cleaner comes with a unique steering function
that allows you to easily manoeuvre the machine.
Particularly beneficial for cleaning in awkward or
confined spaces.
Twist the cleaner in the direction you wish to turn.
CORD STORAGE
Turn the cleaner off and remove the plug. Wind the
cord around the cord storage hooks.
Rotate the storage hooks to quickly release the full
length of the power cord.
3/28/2012 3:59:39 PM