Table of Contents
Advertisement
PREPARING YOUR CLEANER
Position the cleaner in the upright
7
position. Then attach the other end of
the connector hose to the main body of
the cleaner.
Secure the dusting brush onto the dusting
10
brush post.
Globe manual.indd 5
Position the hose in the hose cradle and
8
clip it in place.
Secure the turbo brush* onto the
11
separator lid.
(Certain models only)
- 5 -
Position the handle at the top of the
9
main body. Depress the handle release
button and slide the handle down until it
clicks into place.
IMPORTANT: If you need to access the
12
internal electric power connector press
the upright lock release pedal and lower
the main body to the floor. Release the
locking clips for access.
3/28/2012 3:59:39 PM
Advertisement
Table of Contents
