Page 2
EAN Plus Series 1. Overview The EAN Plus Series is a box type IP camera designed for indoor use. The series comes in four models: EAN3120 Plus / 3220 Plus / 3300 Plus. Model Name Megapixel EAN3120 Plus 1.3 MP...
Note: Contact the shipper if any items appear to have been damaged in the shipping process. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service Branch. Please also keep the shipping carton for possible future use.
EAN Plus Series 2. I/O Terminal Block The I/O terminal block, located on the rear panel of the camera, can be used to develop application for alarm input and output. 1 2 3 4 Pin Assignment No. Function No. Function...
EAN Plus Series If you are using a DC Auto Iris lens: Remove the cover cap from the camera body. Install the lens into the camera body. Connect the DC cable to the DC Auto Iris Lens Connector. When making final focus adjustment, place the ND filter (not supplied in the package) in front of the lens to force the lens iris to open, and then adjust the lens using the Focus / Zoom Screws.
EAN Plus Series 4. Basic Connection Audio Ethernet Micro SD (PoE) Video Out DC 12V Power Reset Alarm Use a standard network cable to connect the camera to the network. Connect the camera to power using one of the following methods: •...
EAN Plus Series 5. Accessing the Camera You have to assign an IP address for your camera to be accessible. To assign an IP address to the camera, use the IP Utility (IPU) software included in the software CD. Please connect the camera in the same LAN of your computer.
Page 8
EAN Plus Series 5. To change the IP address, double-click the IP Address of the camera. Type a new IP address and then click Set IP Address to save the settings. You can also change the other settings by double-clicking the values. After configuring the values, click Save Configuration.
EAN Plus Series 6. Network Connections You can use one of the methods below to connect the camera to the network. Router or LAN Connection This is the most common connection in which the IP camera is connected to a router and allows multiple users on and off site to see the IP camera on a LAN/WAN (Internet).
EAN Plus Series Direct High-Speed Connection In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service Provider) in the camera’s configuration web pages.
EAN Plus Series 7. Upgrading Firmware You can upgrade camera’s firmware using the IP Utility software included in the software CD. 1. Follow Step 1 to Step 4 in 5. Accessing the Camera to log in the camera. 2. Highlight the camera and then click Upgrade Firmware. A browsing window appears.
Page 12
EverFocus USA - California: EverFocus USA - New York: 1801 Highland Avenue, Unit A, Duarte, CA 91010, USA 415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA TEL: +1 626 844 8888 TEL: +1 631 436 5070...