Installing The Cb3000 - Motorola CB3000 Quick Install Manual

Installing the CB3000

Cable and test the CB3000 before moving it to its table top, wall or under a counter operational location. To
cable the CB3000:
NOTE: A cross-over cable is not required to directly connect the CB3000 to a PC.
CAUTION: Do not connect a CB3000 set to Infrastructure mode directly to a LAN (for example, through a
wall port). Such a connection could cause a transmission loop between the CB3000 and its associated
access point, disrupting network connectivity.
1. Screw the antenna clockwise onto the antenna connector on the rear of the CB3000
NOTE: The back of the CB3000 also contains a Kensington lock mechanism for attaching the CB3000 to
an immovable objects in order to prevent theft.
2. Attach one end of an Ethernet cable to a RJ-45 jack on a computer or hub.
3. Connect the other end of the Ethernet cable to the LAN connector on the rear of the CB3000.
4. Plug the power adapter into the DC-IN connector on the rear of the CB3000.
CAUTION: Only use the power adapter supplied with the CB3000. Using an incorrect power adapter
could damage the CB3000 and void the product warranty.
5. Connect the plug end of the power adapter into a power outlet.
The built-in power converter automatically selects and adjusts the power for the appropriate voltage.
6. Verify the installation by checking the status of the LEDs on the front of the CB3000.
Installing the CB3000 2-3