Motorola CB3000 Quick Install Manual page 18

2-12 CB3000 Client Bridge Quick Install Guide
Gateway IP Address
Spanning Tree Protocol
Auto Negotiate
Speed Mode
Duplex Mode
3. Click Apply
4. Click Cancel
The CB3000 is now ready to transmit and receive with a connected device in the open without security.
However, Motorola recommends configuring a basic security scheme (for the purposes of our basic
configuration, WEP 128) to ensure initial communication between the CB3000 and its connected device are
secure.
The Gateway IP Address
to the network.
Select the Spanning Tree Protocol
logically block redundant paths, thus ensuring only one route exists between any
two LANs. Default is disabled.
Select the auto negotiate type. This feature automatically selects the connection
speed and type. Select On to enable Auto-Negotiate/Auto-Sense.
Select the connection speed. This option is available when
set to Off. Select the appropriate speed from the drop down list.
Selects the connection type. This option is available when
set to Off. Select the appropriate connection type. Connection can be either Full
Duplex or Half Duplex.
to save the settings within the Ethernet Settings screen.
to revert the screen back to the last saved configuration.
is the address of the device providing the connection
checkbox to detect loops in a network and
Auto Negotiate is
Auto Negotiate is