Configuring Cb3000 Ethernet Settings - Motorola CB3000 Quick Install Manual

Configuring CB3000 Ethernet Settings

Use the Ethernet Settings screen to specify the name of the CB3000 and assign network address information
required as part of the CB3000 basic configuration:
To configure required Ethernet settings for the CB3000:
1. Select Settings -> Ethernet Settings
2. Configure the
the CB3000 uses.
Device Name
DHCP
IP Address
Subnet Mask
from the CB3000 menu tree.
Ethernet Settings screen to assign a device name and set network address information
Specify a device name for the CB3000. Motorola recommends selecting a name
serving as a reminder of the user base the CB3000 supports (engineering, retail
etc.).
Select the Obtain an IP address automatically
a DHCP server to obtain an IP address. By default,
set to Broadcast.
Use the Unicast option for
the Broadcast options with some DHCP servers.
Select the Use the following IP Address
manually (static) for the CB3000.
The IP Address
A subnet mask accompanies an IP address and the two values work together.
Applying the subnet mask to an IP address splits the address into two parts, an
"extended network address" and a host address.
Configuring CB3000 Ethernet Settings 2-11
Bootp for DHCP Discover
option if an IP address is entered
refers to the address other devices use to address the CB3000.
option if the CB3000 will use
Bootp for DHCP Discover is
if you have issues using