Functional Description; Carton Contents; Assembly - Delta 36-422L Instruction Manual

12" dual bevel laser miter saw

Table of Contents

FOREWORD

Delta Model 36-422L is a high capacity 12" dual bevel compound miter saw equipped with a laser guide and designed

to cut wood and non-ferrous metals. This machine is supplied with design features that increase the cutting capacity.

Also, this model includes built in stops for cutting crown molding. This machine can cut 6" baseboard moulding mounted

vertically, crosscut 2" x 10" dimensional lumber at 90 degrees, miter 2" x 6" dimensional lumber at 45° both left and right,

and bevel 2" x 10" dimensional lumber left and right at 45°. It has positive miter stops at 0°, 15°, 22.5°, 31.62, and 45°

both left and right, and bevel stops at 0°, 33.9°, and 45° left.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in

the manual are representative only and may not depict the actual color, labeling or accessories and are intended to

illustrate technique only.

1 - Miter Saw

2 - Dust Bag

3 - Dust Spout

4 - Wrench

5 - 2mm Hex Wrench

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all

unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline

or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste

wax. Place the machine on a firm, level surface with proper support of the workpiece. To release the head and move

it to the operating position, see "MOVING CUTTINGHEAD TO THE UP POSITION" and "MOVING TABLE TO THE 0°

CUT-OFF POSITION" sections in this manual.

FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL

THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE

INSTRUCTION MANUAL.