ZyXEL Communications Prestige 100WH Quick Start Manual page 18

Prestige 100WH Quick Start Guide
Step 7. On the
DNS Configuration
workstation in the
have one. This field is optional and can be left blank. Leave the
Order box blank if you plan to get the DNS server address(es) from a DHCP server.
Otherwise enter the DNS server address of your ISP in the third box and click
Click OK
Step 8. Now Click
your Windows 95 CD or disks. When the drivers are updated, you may be prompted
to restart the system. Make sure the Prestige is powered on before clicking
allow the workstation to restart.
Step 9. After your workstation restarts, choose
"winipcfg"
your workstation. If no address is shown, verify your cabling.
Repeat the above steps for each Windows 95 workstation on your LAN.
14
tab, select
box. Enter your domain name in the
Host
to save and close TCP/IP
to close the
OK Network
and click . This command will show the TCP/IP configuration of
OK
. Enter a unique name for the
Enable DNS
dialog.
control panel. You may be prompted to insert
RUN... from the Start Menu
box if you
Domain
DNS Server Search
Add
and
yes
. Then type
.