ZyXEL Communications Prestige 100WH Quick Start Manual page 16

Prestige 100WH Quick Start Guide
Step 3. The
TCP/IP Properties
Step 4. Select
Obtain an IP address automatically
of registered IP addresses (most cases); otherwise, select
and enter the IP address and subnet mask for this workstation from the block
provided by your ISP.
Note: Do not assign arbitrary IP address and subnet mask to your workstations.
Otherwise, you will not be able to access the Internet.
12
dialog with
IP Address
tab will appear as shown below.
if your ISP did not assign you a block
Specify an IP address